1-800-890-1000 support@identakid.com

L3 Printer Setup v2

Download User Manual and Client Agent 

  1. User Manual
  2. Quick Start Guide

3. Client Agent v1.3.0

Uninstall Previous L3 Driver 

If you have already set up the printers using the previous version of the driver (v-2.1.0.1), please be sure to first uninstall this version, as well as remove any current instances of the L3 printer from Control Panel before installing the new version provided in this document (v-2.7.4.0)

To uninstall the previous version, please try the following: 

  1. In the Windows Start menu, search for “Add or Remove Programs”. 
  2. From the list, uninstall any instance of the v-2.1.0.1 driver. 
  3. Next, navigate to the “Printers and Scanners” setting page. Remove any current instances of the L3 before proceeding with the next instructions in the 

document.

Driver Installation: 

  1. Download the ‘exe’ file from this link: 

https://s3.amazonaws.com/Public.ccss.cc/printers/hprt/MKT_L-3_Printer_Windows_Driv er_v2.7.4.0.exe 

  1. For this installer you will need one of the printers powered on, and USB-connected to the PC prior to running the installer. 
  2. Double click to open the ‘exe’ file. Follow any instructions and finish the installation. 4. At this point, you may power on and connect any secondary printer.

Client Setup for Visitor Printing: 

  1. Load visitor paper with the labels facing up. 
  2. In the Client, go to ‘Devices’ and select ‘Add New Device’. Select ‘Generic Printer’. a. From the ‘Printer’ dropdown, select the printer. (It should be listed as either “L3” or “L3 (Copy 1)” 
  3. From the ‘Paper Type’ dropdown, select “IAK Label Long”. 
  4. From the ‘Printer Model’ dropdown, select ‘L3’. 
  5. From the ‘Print Protocol’ dropdown, select ‘Default’.

Client Setup for Tardy Printing: 

  1. Download the following Utility Tool: 

https://s3.amazonaws.com/Public.ccss.cc/printers/hprt/HPRTUtilityForLabel_Channel+V2.

0.0.24.zip 

  1. Prior to opening the Utility Tool (application file), power off the designated visitor printer. Only leave the tardy printer powered on. 
  2. Click ‘Add Printer’ – Select LPQ80. Click ‘Ok’. 
  3. Highlight the other printer in the ‘Printer List’ pane and click ‘Delete Printer’ so that only the LPQ80 is remaining. 
  4. Next, click ‘Parameter Setting’. 
  5. Set ‘Judge Paper Mode’ to ‘Receipt’. 
  6. Set ‘Protocol Type’ to ‘ESC protocol’. 
  7. Click ‘Set’ when done. This will automatically shut off the tardy printer. 9. Finally, click ‘Quit’ to close the tool. 
  8. In the client, create a new instance of ‘Generic Printer’. 
  9. For ‘Paper Type’, select ‘Thermal Tape’. 
  10. For ‘Printer Model’, select ‘L3’. 
  11. For ‘Print Protocol’, select ‘ESC/POS’. 
  12. Save and test print.